This is the Radio Controlled, Electric Powered 1/10 Scale            
               Senton Mega 4x4 Short Course Truck from Arrma.                  
                                                                               
FEATURES: Chassis: Molded plastic with side impact nerf bars, chassis can hold 
            batteries ranging from a 6-cell NiMH to a 4S LiPo pack 6.50"       
            (165mm) long, and 2" (51mm) wide                                   
          Drive: Four wheel with telescopic sliding composite driveshafts,     
            spring loaded center driveshaft ensures solid engagement with      
            front and rear gearbox inputs                                      
          Differentials: Composite case construction, 1M straight cut internal 
            gears eliminate shimming or meshing issues, diffs are lubricated   
            with grease, viscosity not specified by manufacturer               
          Suspension: Captured hinge pin type                                  
          Radio: 2.4GHz Tactic TTX300 3-channel with steering and throttle end 
            point adjustments, steering rate adjustment, user programmable     
            3rd channel, TR326 receiver with fail/safe                         
          Steering Servo: ADS-5 waterproof case, 70oz/in (5kg-cm) of torque,   
            25T spline                                                         
          Motor: Brush equipped, Mega 12T 550 size                             
          Electronic Speed Control: Arrma Mega, compatible with 550 size motors
            down to 12 turns, handles 5-9 cell NiMH, or 2S LiPo (7.4V) LiPo    
            batteries                                                          
          Shocks: Composite body, coil over, with keyed spring perch and       
            self bleed design, filled with 500cst silicone shock oil,          
            equivalent to around 40wt shock oil from other manufacturers       
          Shock Mounts: Molded plastic                                         
          Bumpers: Molded composite flexible plastic with shock absorbing      
            loops that attach bumpers to front and rear of chassis             
          Steering: Ball raced steering with fixed molded upper links, servo   
            saver                                                              
          Battery: 8.4V 2400mAh 7-cell NiMH hump configuration, T-plug         
            connector, secured in chassis with two hook and loop straps        
          Battery Charger: ADC-N7 wall charger                                 
          Battery Tray: 6.5x2.01x1.89" (165x51x48mm) maximum battery dimensions
          Body: Trimmed and printed                                            
          Wheels: Nylon construction, five spoke style, black in color, 14mm   
            hex, mounting bead: 2.2" (56mm) outer x 3.0" (76mm) inner          
          Tires: dBoots Fortress multi-surface with foam inserts 1.7" (42mm)   
            wide, 4.1" (104mm) overall diameter                                
          Caster: Non-adjustable caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the 
            chassis                                                            
          Camber: Non-Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle       
          Spur Gear: 48dp pitch 91 tooth, plastic construction                 
          Pinion Gear: 48dp pitch 17 tooth, metal construction                 
          Warranty: Two year limited warranty beginning at date of purchase    
                                                                               
INCLUDES: Assembled Senton Mega 4x4 Short Course Truck with Radio, 3-in-1      
            Unit, Trimmed Body, Battery, Charger and Instruction Manual        
                                                                               
REQUIRES: AA Batteries: Four for transmitter                                   
          Track and maintenance equipment                                      
                                                                               
SPECS:      Vehicle;                                                           
          Length: 22" (558mm)                                                  
          Width: 11.7" (298mm)                                                 
          Height: 8.2" (208mm)                                                 
          Weight: 6.3lbs (2.9kg)                                               
          Ground Clearance: 1.26" (32mm)                                       
          Standard Final Gear Ratio: 9.71 - 18.72                              
          Front Shock Spring Rate: 82gf/mm                                     
          Rear Shock Spring Rate: 62gf/mm                                      
          Battery Dimensions: 5.5 x 2 x 1.9" (140 x 51 x 48mm)                 
            with battery mounting blocks in place                              
          Max Battery Dimensions: 6.50 x 2 x 1.9" (165 x 51 x 48mm)            
            with battery mounting blocks removed                               
                                                                               
            Body;                                                              
          Length: 20.7" (527mm)                                                
          Width: 9.8" (250mm) behind front wheels, narrowest point             
                 11.6" (296mm) at rear wheels, widest point                    
          Height: 5.8" (147mm)                                                 
                                                                               
COMMENTS: Available in the following color schemes;                            
            Blue and Black, ARAD61BL                                           
            Red and Black, ARAD61RL                                            
                                                                               
          For replacement ball bearings use:                                   
          Qty.  Size         Location        Qty.      Bearing Set             
           2 12x18x4mm    Steering Blocks    1         ARAC3173                
           2 6x12x4mm     Steering Blocks    1         ARAC3144                
           2 12x18x4mm       Rear Hubs       1         ARAC3173                
           2 6x12x4mm        Rear Hubs       1         ARAC3144                
           2 10x15x4mm    Slipper Clutch     1         ARAC3202                
           2 12x18x4mm       Fr Diff         1         ARAC3173                
           2 10x15x4mm     Fr Diff           1         ARAC3202                
           2 12x18x4mm     Rear Diff         1         ARAC3173                
           2 10x15x4mm     Rear Diff         1         ARAC3202                
                                                                               
COMMENTS: If powering the vehicle with a 2S LiPo battery, the jumper on the    
            ESC MUST be set to LiPo mode.                                      
            Face the side of the ESC with the Battery Mode Indication Sticker  
            Place the jumper across the center and left pins when viewing this 
            sticker.                                                           
                                                                               
          *Some aftermarket batteries may require the removal of the Battery   
            Mounting Block for proper fit. This can be accomplished by         
            removing the 3x12mm screw that threads through the chassis and     
            mounting block.                                                    
                                                                               
                                                                   jxs 08/31/17
                                                           updated tlc 10/12/17
                                                                         ir/jxs
 
BOX DIMENSIONS:   13.25" W. X   9.00" H. X  27.50" L.
BOX WEIGHT:   11.05 LBS.